RANKCONN RC-602 - Automatic Bursting Strength Testing Machine
Automatic Bursting Strength Testing Machine
Brand: Rankconn Instruments
Model: RC-602
Product Introduction:
In line with the relevant standards, the pneumatic clamping sample is adopted, and the liquid crystal display is suitable for the determination of the burst resistance of cardboard, corrugated cardboard and other sheet plates.
Features:
ISO 2759 : Determination of the bursting resistance of cardboard;
GB/T 1539 : Determination of the bursting resistance of cardboard£»
QB/T 1057 : Paper & Cardboard Burst Resistance Tester
Main technical parameters:
Brand: Rankconn Instruments
Model: RC-602
Product Introduction:
In line with the relevant standards, the pneumatic clamping sample is adopted, and the liquid crystal display is suitable for the determination of the burst resistance of cardboard, corrugated cardboard and other sheet plates.
Features:
- Once the cardboard is crushed, it will automatically stops and returns to the initial position;
- Fully automatic one-button operation;
- It can store 40 sets of data at the same time;
- Equipped with micro printing, test results can be printed;
- Equipped with an emergency stop button to improve operation safety;
- Equipped with air pressure gauge to monitor pressure at any time;
- High-definition LCD Touch Screen display
ISO 2759 : Determination of the bursting resistance of cardboard;
GB/T 1539 : Determination of the bursting resistance of cardboard£»
QB/T 1057 : Paper & Cardboard Burst Resistance Tester
Main technical parameters:
Model | RC-602 | |
Induction method | Pressure converters | |
Savings results | With printing function, 10 sets of data can be printed to automatically calculate the average value | |
Display | High-definition LCD screen display, digital A/D value advance rate of 100 times/s, high test accuracy | |
Strength Units | kgf/cm2 ¡¢Lbf/in2 ¡¢ Kpa¡¢Pa¡¢MPa (with unit switching function) | |
Measuring Range | 250¡«5600kPa | |
Resolution | 1kPa | |
Measurement Accuracy | Indication error | Better than ±1% F.S |
Variability of the indication | Better than ±1% | |
Hydraulic speed | High pressure type: 170±10ml/min | |
Adhesive film resistance |
bulge10mm£¬170kPa¡«220kPa bulge 18mm£¬250kPa¡«350kPa |
|
Clamp ring material | stainless steel | |
Gripping force | >690Kpa (adjustable) | |
Inner diameter of the upper clamp ring hole | φ£¨31.5±0.05£©mm | |
Inner diameter of the lower clamp ring hole | φ£¨31.5±0.05£©mm | |
Upper chuck diameter: | 95mm | |
Lower chuck diameter: | 135mm | |
Hydraulic oil | Silicone oil | |
Machine Dimension | 465*465*500mm | |
Weight | Approx. 67KG | |
Power supply | AC220V | |
Standard configuration | 2 pieces of rubber film, 1 wrench, 1 pack of correction tablets, 1 bottle of silicone oil, and 1 rubber hammer |