LINSHANG - Coating Thickness Gauge LS225
LINSHANG - Coating Thickness Gauge
Brand: Linshang
Model: LS225
Features:
* Accuracy: +/-(2%+0.3um)
* Suitable for coating thickness which lower than 10micron
* Measure the anodic oxide layer thickness on aluminum N1500
Machine Introduction:
Coating thickness gauge is composed of the host and the probe. The host is mainly used for the display and statistics of measurement data. The probe uses digital technology, the data collection and processing is completed on the probe. According to the different substrates, one ferrous probe (F500) and one non ferrous probe (N1500) have been developed.
Technical Specifications:
F500 Probe Technical Parameter:
N1500 Non-Ferrous Probe Technical Parameters:
Brand: Linshang
Model: LS225
Features:
* Accuracy: +/-(2%+0.3um)
* Suitable for coating thickness which lower than 10micron
* Measure the anodic oxide layer thickness on aluminum N1500
Machine Introduction:
Coating thickness gauge is composed of the host and the probe. The host is mainly used for the display and statistics of measurement data. The probe uses digital technology, the data collection and processing is completed on the probe. According to the different substrates, one ferrous probe (F500) and one non ferrous probe (N1500) have been developed.
Technical Specifications:
| Display | 240×160 dot matrix LCD |
| Power supply | 4pcs of 1.5V AAA alkaline battery |
| Operation temperature range | 0C-50C |
| Storage temperature range | -20C-60C |
| Host size | 148*76*26 mm |
| Weight(with battery) | 194g |
F500 Probe Technical Parameter:
| Parameter | Value |
|---|---|
| Measuring principle | Magnetic Induction |
| Measuring range | 0.0-500μm |
| Resolution |
0.1μm: 0μm - 99.9μm 1μm: 100μm - 500μm |
| Repeatability | ≤ ± (0.8%H+0.1μm) Test with fixture, H is the standard value |
| Accuracy | ≤±(2%H+0.3μm) after calibration of 1-5 points, H is the standard value |
| Unit | μm / mil |
| Measuring interval | 1.5s |
| Minimum measuring area | Ø = 7mm |
| Minimum curvature | Convex:1.5mm / Concave:10mm |
| Minimum substrate thickness | 0.1mm |
| Calibration | Support zero reference adjustment and 1 to 5-points calibration |
| Probe size | 110*15 mm (Without connecting cable) |
| Probe weight | 81g |
N1500 Non-Ferrous Probe Technical Parameters:
| Parameter | Value |
|---|---|
| Measuring principle | Eddy current |
| Substrate | Non-ferromagnetic metal |
| Measuring range | 0.0-1500μm |
| Resolution |
0.1μm: 0μm - 99.9μm 1μm: 100μm - 999μm 0.01mm: 1.00mm – 1.50mm |
| Repeatability | ≤ ± (0.8%H+0.1μm) Test with fixture, H is the standard value |
| Accuracy | ≤±(2%H+0.3μm) after 5 points calibration, H is the standard value |
| Unit | μm / mil |
| Measuring interval | 0.8s |
| Minimum measuring area | Ø = 7mm |
| Minimum curvature | Convex:1.5mm / Concave:10mm |
| Minimum substrate thickness | 0.05mm |
| Calibration | Support zero reference adjustment and 1 to 5-points calibration |
| Probe size | 110*15 mm (Without connecting cable) |
| Probe weight | 81g |
