MEMMERT - Universal Oven (UF750)
MEMMERT - Universal Oven (UF750) Temperature, Humidity & Moisture Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
Download Files
Memmert_Universal_Oven_UF750.pdf (532.68 KB)
MEMMERT - Universal Oven (UF750)

Brand: Memmert
Model: UF750 


Product Descriptions:


The universally aplicable lab oven U is Memmert's classic appliance for temperature control in science, research and material tests in industry. The technologically perfected masterpiece made of high-quality, hygienic, easy-to-clean stainless steel leaves nothing to be desired in terms of ventilation and control technology, overtemperature protection and precisely tuned heating technology.


Product Specifications: 


Temperature


Working temperature range at least 5 (UN/UNplus/UNm/UNmplus) or 10 (UF/UFplus/UFm/UFmplus) above ambient temperature at +300°C
Setting accuracy temperature up to 99.9°C: 0.1 / from 100°C: 0.5
Setting temperature range +20 to +300°C
Temperature sensor 1 Pt100 sensor DIN class A in 4-wire-circuit

Control Technology

Language Setting  German, English, Spanish, French, Polish, Czech, Hungarian, 
Control COCKPIT SingleDISPLAY, Adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display
Timer Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function Setpoint WAIT the process time does not start until the set temperature is reached
Calibration three freely selectable temperature values
Adjustable Parameters temperature (Celcius or Fahrenheit), fan speed, air flap position, programme time, time zones, summertime/wintertime

Ventilation

Fan forced air circulation by 2 quiet air turbines, adjustable in 10% steps
Fresh air Admixture of pre-heated fresh air by electronically adjustable air flap
Vent vent connection with restrictor flap

Communication

Documentation programme stored in case of power failure
Programming AtmoCONTROL software for reading out, managing organising the data logger via Ethernet interface (temporary trial version can be downloaded). USB stick with AtmoCONTROL software available as accessory (on demand)

Safety

Temperature control adjustable electronic overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
Autodiagnostic system for fault analysis

Standard equipment

Internals 2 stainless steel grid(s), electropolished
Works calibration certificate Calibration at 160°C
Door fully insulated stainless steel doors with 2-point locking (compression door lock)

Stainless steel interior

Dimensions w(A) x h(B) x d(C) : 1040 x 1200 x 600 mm (d less 39 mm for fan)
Interior easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing with integrated and protected large-area heating on four sides
Volume 749 l
Max. number of internals 14
Max. loading of chamber 300 kg
Max. loading per internal 30 kg

Textured stainless steel casing

Dimensions w(D) x h(E) x d(F) : 1224 x 1720 x 784 mm (d +58mm door handle)
Installation on lockable castors
Housing rear zinc-plated steel

Electrical data

Voltage Electrical load 400 V and 3x 320 V w/o neutral, 50/60 Hz approx. 7000 W


Ambient conditions

Set up The distance between the wall and the rear of the appliance must be at least 15 cm. The clearance from the ceiling must not be less than 20 cm and the side clearance from walls or nearby appliances must not be less than 5 cm.
Altitude of installation max. 2,000 m above sea level
Ambient temperature +5 °C to +40 °C
Humidity rh max. 80%, non-condensing
Overvoltage category II
Pollution degree 2

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version