HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range)
HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range) Temperature, Humidity & Moisture Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
HANNA - Combo Tester pH/ Conductivity/ TDS Tester (High Range) 

Brand: Hanna Instruments
Model: HI98130



Product Descriptions:

HI 98130 is a waterproof pH/EC/TDS/temperature meters. The housing has been completely sealed against humidity and designed to float. All pH and EC/TDS readings are automatically temperature compensated (ATC) and temperature values can be displayed in 
°C or °F units. For EC/TDS readings, the EC/TDS conversion factor (CONV) is selectable by the user, as well as the temperature compensation coeffcicient β (BETA). The meters can be calibrated at one or two points for pH (with auto-buffer recognition and against five memorized buffer values), and at one point for EC. Measurements are highly accurate with a unique stability indicator right on the LCD. These meters are also provided with battery level indication at start-up, and with a low battery symbol which warns the user when the batteries need to be replaced. In addition the Battery Error Prevention System (BEPS) avoids erroneous reading caused by low voltage level by turning the meter off.


Product Features:

3 sensors in a single meter
  • pH electrode with extractable junction
  • Amperometric EC/TDS sensor
  • Exposed temperature probe for faster EC/TDS readings
Waterproof
  • Designed to float if accidently dropped in sample
Wide pH Range
  • pH range is from 0.00 to 14.00 pH
Selectable EC to TDS conversion factor
  • Choice of either 1 0.45 or 1.0 conversion factor
Automatic Temperature Compensation
  • All readings are compensated for variations in temperature
  • Temperature displayed in °C or °F along with pH, EC, or TDS reading
Stability Indicator
  • Meter displays a clock tag that will disappear when the reading has achieved stability
Hold Button
  • Freezes reading on the display to allow recording of measurement
BEPS (Battery Error Prevention System)
  • Meter will automatically shut off if there is not enough power to get an accurate measurement
Battery % level at startup

Low Battery Indicator
  • When the level is below 5%, the battery symbol on the LCD blinks to indicate a low battery condition
Auto-off
  • Auto-off feature automatically shuts off meter after 8 minutes of non-use to maximize battery life

Product Specifications:

pH Range 0.0 to 14.0 pH
pH Resolution 0.01 pH
pH Accuracy ±0.05 pH
Conductivity Range 0.00 to 20.00 mS/cm
Conductivity Resolution 0.01 mS/cm
Conductivity Accuracy ±2% F.S.
TDS Range 0.00 to 10.00 ppt (g/L)
TDS Resolution 0.01 ppt (g/L)
TDS Accuracy ±2% F.S.
Temperature Range 0.0 to 60.0°C / 32.0 to 140.0°F
Temperature Resolution 0.1°C / 0.1°F
Temperature Accuracy ±0.5°C /±1°F
EC/TDS Calibration Automatic, one-point at: 12.88 mS/cm, 6.44 ppt (g/L)
pH Calibration Automatic, at one or two points with two sets of standard buffers (pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18)
Temperature Compensation pH: automatic; EC/TDS: automatic with β adjustable from 0.0 to 2.4% / °C
TDS Conversion Factor 0.45 to 1.00
pH Electrode HI73127 (replaceable; included)
Battery Type/Life 1.5V (4) / approx. 100 hours of continuous use, auto-off after 8 minutes of non-use
Environment 0 to 50°C (32 to 122°F); RH max 100%
Dimensions 163 x 40 x 26 mm (6.4 x 1.6 x 1.0”)
Weight 100 g (3.5 oz)
Ordering Information HI98130 is supplied with HI73127 pH electrode and HI73128 electrode removal tool, batteries (4 x 1.5V) and instructions.

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version