RIKEN KEIKI - Portable Gas Detector (FI-8000)
RIKEN KEIKI - Portable Gas Detector (FI-8000) Gas Measurement Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
RIKEN KEIKI - Portable Gas Detectors (FI-8000)

Brand: Riken Keiki
Model: FI-8000


Product Descriptions:


FI-8000 Optical Interferometer for Measuring Gas Purity in Air / O2 / N2 and CO2
The FI-8000 is the latest model from Riken in a long line of optical interferometers dating back to 1930's when Riken's founder first developed the technology for Methane detection to help prevent explosion accidents on oil tankers and in coal mines. FI-8000 gives extremely accurate (typically 3% of Reading across the whole range) and stable readings as long as there is minimal or no interference gases present. 


Product Features:

  • Up to 8 gas measurng ranges : Can have up to 8 different ranges to cover many Applications
  • Works by measuring the refractive index of the Gas : Highly accurate across the entire range
  • Long battery life : Operates continously for over 12 hours (on 3 AA batteries). Optional Lithium ion battery unit give over 18 hours continuous use.
  • Rugged Design : Ingress Protection IP67 (suited for outdoors), with robust impact resistant rubber
  • Very long in service Life : No replaceable sensor optics last many years if maintained properly
  • Sampling Method : Two sample methods available : Sample Pump or Hand Aspirated
  • Data Logging : Up to 256 points of data can be recorded either automatically at specified time intervals, or by instantaneous manual recording.
  • Intermittent Measuring Mode : Switches the pump off into power-saving standby state that saves battery life (for sample pump type only)
  • Intrinsic Safety Design : CE ATEX intrinsic safety explosion class II 1G Ex ia IIC T4 Ga

Technical Specification:

Model FI-8000
Measuring principle Optical Interferometric Method
Measuring gas Other gas may be possible
Indication accuracy Within ±3% (at constant temperature) *
Type TYPE P-_ _-_ _ TYPE A-_ _-_ _
Sampling method Pump suction type Hand-aspirating type
Self-diagnosis function Low battery, Low light, Low contrast, abnormal atmospheric pressure, and abnormal temperature
Display LCD digital (7-segment value display + code + 20 segment word x 2 lines)
Screen Measuring gas, gas concentration, measuring unit and battery capacity reminder
Power source Alkaline battery pack (AA size battery x 3 pcs) (standard)
Or Lithium-ion battery (optional)
Ingress proof rating IP67 equivalent
Ambient humidity & temp Temperature: -20 ~ 50°C, Humidity: Below 95% RH (non-condensing)
Dimensions Approx. 154 (W) x 127 (H) x 81 (D) mm
Weight Approx. 1.1 kg (including alkaline batteries)
Approx. 1.2 kg (including lithium-ion batteries)
Explosion proof Intrinsically safe (Exia II CT4) (ATEX)
Continuous operation Over 12 hrs (for alkaline battery use)
Over 18 hrs (for lithium-ion battery use)
(25°C with no backlight on)
Over 16 hrs (for alkaline battery use)
Over 24 hrs (for lithium-ion battery use)
(25°C with no backlight on)
External output IrDA (for data logging)
Function Data logging, atmospheric pressure correction, temp. compensation

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version