PROSTAT - PAS-853BRM Digital Surface Resistance Test Kit
PROSTAT - PAS-853BRM Digital Surface Resistance Test Kit Electrostatics (ESD) , Ionizer & Resistivity Meter Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
PROSTAT - PAS-853BRM Digital Surface Resistance Test Kit
Brand: Prostat
Model: PAS-853BRM
 

WIDE RANGE SURFACE RESISTANCE OHM METER KIT
 
Product Features:

  • Surface Resistance Kit from 0.01 ohm to 9.99x1012 ohms
  • Nominal Full Range Tolerance Averages <±5%
  • Fully Automatic Resistance Range, Test Voltage and Electrification Period control
  • Determines if a surface is Dissipative, Conductive, or Insulative
  • Measures resistance point-to-point(Rtt) and point-to-ground (Rtg)
  • Measures resistance of Static Control Floors, ESD Work Surfaces and Packaging Material
  • Conforms to all ESD Association Standards for Resistive Characterization
  • Includes 2 each Conductive Rubber Electrodes
  • Packaged in a hard shell Carrying Case
  • Certificate of Calibration Traceable to NIST included
Product Overview:

Wide Range Resistance Kit
The PAS-853BRM Digital Surface Resistance Test Kit is the ideal kit for the ESD Plant Auditor. It includes the PAS-853B Wide Range Ohmmeter with 2 each PRS-801W 5 lbs Conductive Rubber Electrodes.
Designed to Support ESD TR53
The PAS-853B is a wide range ohmmeter that measures accurately from 0.01 Ω to 9.99 x 1012 Ω. The kit is designed to measure resistance point-to-point (Rtt) or surface to ground (Rtg), and meets audit requirements of ESD TR53, while supporting ANSI/ESD S20.20 program standard and periodic verification requirements.
Variable & Constant Test Voltages

  • <10 Volts Variable from 0.01 to 9.9x103 ohms
  • 10 Volts (±<5% Constant Voltage) from 1.0x104 to 9.99x105 ohms
  • 100 Volts (±<2% Constant Voltage) from 1.0x106 to 9.99x1012 ohms
A Fast and Reliable Resistance Meter
The PAS-853B is a lightweight meter with a built-in electrification period of 3 seconds for measurements from 1.00E-2 Ω to 9.99E+5 Ω and 8 seconds from 1.00E+6 Ω to <1.00E+12 Ω, making it a quick and easy way to measure more surfaces throughout your day.
Fully Automatic for Resistance and Test Voltage
The PAS-853B will determine the resistance range and test voltage automatically when you make measurements. After the minimum electrification period, the display will freeze an accurate measurement for 10 seconds. Alternatively, the meter has the option of measuring in Continuous mode, which will continue to measure until Reset is pressed.
Conductive Probes for Surface Resistance
The PRS-801W are conductive probes used for surface resistance measurements. Measuring under 500 ohms each a clean plate, the 5lb electrodes meet the requirements of ANSI/ESD S4.1 and ANSI/ESD S7.1 for resistance, diameter, weight and durometer. .
Complies to ANSI/ESD Standards and Test Methods
The PAS-853BRM is ideal for making measurements in accordance with test procedures in the following:

  • Floors - ANSI/ESD S7.1- Resistive Characterization of Materials Floor Materials
  • Worksurfaces - ANSI/ESD S4.1 Worksurfaces
  • Compliance Verification - ESD TR53 - Resistance Measurements
  • Floor/Footwear - ANSI/ESD STM97.1 - Floor Materials and Footwear- Resistance Measurement in Combination with a Person
  • Garments - ANSI/ESD STM2.1 Garments
  • Seating - ANSI/ESD STM12.1- Seating - Resistive Measurement

Technical Specification:

General Specifications

Characteristics  
Measuring Range 0.01 Ω to 9.99 x 1012 Ω
Measurement Modes Auto, Manual and Continuous
Display 69.8 mm x 30.5 mm (2.75” x 1.20'')
6 digit - 7 segment TN display
Battery Power One 9V Alkaline Transistor Battery
Battery Life > 50 hours
Operating Temperature 18°C to 32°C (65°F to 90°F)
Operating Relative Humidity 10% – 60%, non-condensing
Operating Altitude 2000 m
Dimensions (WxHxD 109 mm x 184 mm x 36 mm
4.30 in x 7.25 in x 1.40 in
Weight 375 g (13.2 oz)
Case Material ABS Plastic with Rubber Side Grips
Color Grey
Warranty 1 Year Limited Warranty


Resistance Measurement Specifications
Measuring Range Accuracy1
0.1E-1 to 1.99E+0Ω ±10%, ±2 Counts
2.00E+0 to 9.99E+9Ω ±2%, ±2 Counts
1.00E+10 to 9.99E+10Ω ±5%, ±2 Counts
1.00E+11 to 9.99E+11Ω ±10%, ±2 Counts
1.00E+12 to 9.99E+12Ω ±20%, ±4 Counts
  • 1 Tolerance and accuracy measurements were conducted under controlled conditions with close tolerance reference resistors.
     
Test Voltages
Test Voltage Constant Voltage Auto Mode Manual Operation
<10V Variable (Based on resistance Load) Functional within range
0.01 Ω to <1.0E+4 Ω
Resistance Range:
0.01E-1 to 9.99E+9 Ω
10V Constant Voltage (Under Load) Functional within range
1.0E+4 Ω to <1.0E+6 Ω
Resistance Range:
0.9E+4 to 9.99E+10 Ω
100V Constant Voltage (Under Load) Functional within range
1.0E+6 Ω to <1.0E+13 Ω
Resistance Range:
0.90E6 to 9.99E12 Ω
  • 1 at 23°C (73.5°F) and 30% RH
Measurement Modes
Mode Resistance Range Test Voltage  
Auto Automatic Automatic @<10V: 0.01 to <1.00E+04 Ω
@ 10V: 1.00E+04 to <1.00E+06 Ω
@100V: 1.00E+06 to <2.00E+14 Ω
<10V Manual Operation 0.01E-1 to 9.99E9 Ω 0.01 to 9.99V  
10V Manual Operation 0.98E4 to 9.99E10 Ω Nominal, Semi-Constant  
100V Manual Operation 0.98E6 to 9.99E12 Ω 100V (±<5V) Constant Voltage  

Electrification Period
Resistance Range Measurement Period Minimum Electrification Period
1.00E-2 Ω to <1.00E6 Ω 2 seconds 3 seconds
1.00E6 Ω to <1.00E12 Ω 2 seconds 8 seconds
1.00E12 Ω to <1.00E13 Ω Variable 12 seconds
 
 
What’s Included in this Package:

  • PAS-853B Wide Range Ohmmeter
  • PAS-853BLR 200 cm Silicone Test Lead - Red
  • PAS-853BLB 200 cm Silicone Test Lead - Black
  • PTB-915 Audit Test Bed
  • PSI-870MAC Alligator Clip (2)
  • PRS-801BC Bulldog Clip
  • PAS-853S Test Lead Shunt
  • PRS-801W 5 lbs Conductive Rubber Electrodes (2)
  • PAS-105C Carrying Case

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version