NIDEC SHIMPO - Digital Stroboscopes with a Built-in Rechargeable Battery DT-315N
NIDEC SHIMPO - Digital Stroboscopes with a Built-in Rechargeable Battery DT-315N Electrical & Electronic Meter Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
Digital Stroboscopes with a Built-in Rechargeable Battery
Brand:  Nidec Shimpo - Japan
Model: DT-315N



Introduction:

The flashes enable high-accuracy rotational speed measurement and stop motion analysis. The device provides a wide measuring range from 40.0 to 35,000 rpm. With a phase adjustment function, it is possible to move an image while maintaining synchronization. Provided with an external signal connector as a standard feature, synchronization and delayed flash using external signals are also possible. A xenon lamp is used as the light source. Power is provided by a dedicated rechargeable NiCd battery.

 
Features:
 
A wide measuring range
The high-accuracy flashing enables measurement covering a wide range between 40.0-35,000 rpm.
Provided with a phase adjustment function

It is possible to move an image while maintaining synchronization.
The standard feature of an external signal connector is provided for synchronization and delayed flash using external signals.

Provided with a memory function

The flashing frequency is memorized at the time of turning off the power and recalled when the power is turned on next time.
 
Measuring/flashing range 40.0-35,000 rpm (0-35,000 in the external synchronization mode)
 
Model DT-311N DT-315N
Number of flashes (rpm) 40.0 to 35000 0 to 35000 in external sync mode
Internal oscillation
mode
Display decomposition function 0.1: 40.0 ~ 5000
0.2: ~ 8000
0.5: ~ 10000
1: ~ 35000
Jump function Yes (Pressing the dedicated switch doubles or doubles the number of flashes)
Integer function Yes (display decimals, do not set)¡¡¡¡¡¡¡¡¡¡¡¡¡¡
Memory function Yes (memorizes the number of flashes when the power is turned off, and then flashes at that number of flashes when the power is turned on)
External sync
mode
input signal Voltage input H level: 2.5V to 12V
L level: 0.8V MAX
Pulse width 50μs or more
Input impedance 10kΩ or more
Speed ​​measurement function 40.0 to 35000 rpm (disabled during delayed flash)
Delayed emission In the range of 40.0 to 10000 rpm
, the delay angle can be set every 0 to 359 °
¡¡1 °, or the
delay time can be set every 0 to 2000 ms 1 ms.
display 5-digit red LED 7 segment
Synchronous output signal 12V voltage signal Pulse width approx. 400μs
Setter Multi-rotation encoder, tact switch
Flash light source Xenon lamp
Lamp input 10W
Power supply AC100-120V Rechargeable (dedicated NiCd battery)
Light emission for about 1 hour continuously or
attached AC adapter g (quick charge for 2 hours)
AC100V ± 10%
Luminous timer Continuous lighting or stop flashing after a set time of 1 to 120 minutes
Power output for sensor DC12V 40mA
Power cord 2.4m ¨D
Operating temperature 0-40 ¡æ
Mass 1.2kg 2.1kg
Accessories Pistol grip Dedicated adapter
 
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version