MITECH - Digital Ultrasonic Flaw Detector (MFD500B)
MITECH - Digital Ultrasonic Flaw Detector (MFD500B) Ultrasonic NDT Testing Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
MITECH – Digital Ultrasonic Flaw Detector
Brand: Mitech
Model: MFD500B


 
Product Introduction:

Based on ultrasonic principle, digital ultrasonic flaw detector MFD500B with 320*240 TFT LCD, it can test, orient, evaluate and diagnose various flaws such as crack, lard, air hole in workpiece’s interior swiftly and accurately without any destruction. It can be used in Laboratory as well as in engineering filed. With range of 0-9999mm, it can meet the requirement for general defect inspection in manufacturing industry, metallurgical industry, metal processing industry, chemical industry and so on. Low power design with large capacity and high performance lithium battery module, it can be long standby for months. High quality with low price, it is the first choice for the practical economic model for ultrasonic testing equipment.


Features:

Gate Alarm
Gate position, gate width and gate height can be adjustable at will. The B gate can chose to set wave-getting alarm or wave-losing alarm. The beep in gate and LED light can be alarmed or closed (the LED light alarm is very effective under the noise environment).



Specification:


Range: 0 to 400 inches (0 to 9999 mm)
Bandwidth:  0.5 to 15 MHz
Material Velocity  (1000 to 9999 m/s)
Dynamic Range:  ≥ 32dB
Vertical linear error: ≤ 3%
Horizontal linear error: ≤ 0.2%
Resolution: > 40dB (5P14)
Sensitivity Leavings: 60dB (flat-bottomed deep hole 200mm§¶2)
Rejection: 0 to 80% Linear
Noise level: ≤ 10%
Power supply: DC 9V; lithium batteries work for 4 to 8 hours or more
Ambient temperature: -20 to + 50C
Relative Humidity: 20 to 95% RH
Overall dimensions:  10.5” H x 6.8”W x 2.44”D (263 × 170 × 61 mm)

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version