Dumbbell Cutter (Manganese Steel & Stainless Steel)
Use of dumbbell cutter
Dumbbell Cutter
Material (Option):
Manganese Steel
Chrome Steel
We do provide service and supply for below:
* ISO Type
* ASTM Type
* Customize according to the provide size/drawing.
Standards Size:
ASTM 412 A,B,C,D,E,F
ISO 37 Type 2
EN 455
BS 7188
Dimensions of Standard Dumbbell DiesA (Metric Units)
A: Dies whose dimensions are expressed in metric units are not exactly the same as dies whose dimensions are expressed in U.S. customary units. Dies dimensioned in metric units are intended for use with apparatus calibrated in metric units.
B: For dies used in clicking machines it is preferable that this tolerance be ±0.5mm.
Dimensions of Standard Dumbbell DiesA (U.S. Customary Units)
A: Dies whose dimensions are expressed in metric units are not exactly the same as dies whose dimensions are expressed in U.S. customary units.
B: For dies used in clicking machines it is preferable that this tolerance by ±0.02in.
Material (Option):
Manganese Steel
Chrome Steel
We do provide service and supply for below:
* ISO Type
* ASTM Type
* Customize according to the provide size/drawing.
Standards Size:
ASTM 412 A,B,C,D,E,F
ISO 37 Type 2
EN 455
BS 7188
Dimensions of Standard Dumbbell DiesA (Metric Units)
Dimension | Units | Tolerance | Die A | Die B | Die C | Die D | Die E | Die F |
A | mm | ±1 | 25 | 25 | 25 | 16 | 16 | 16 |
B | mm | max | 40 | 40 | 40 | 30 | 30 | 30 |
C | mm | min | 140 | 140 | 115 | 100 | 125 | 125 |
D | mm | ±6B | 32 | 32 | 32 | 32 | 32 | 32 |
D-E | mm | ±1 | 13 | 13 | 13 | 13 | 13 | 13 |
F | mm | ±2 | 38 | 38 | 19 | 19 | 38 | 38 |
G | mm | ±1 | 14 | 14 | 14 | 14 | 14 | 14 |
H | mm | ±2 | 25 | 25 | 25 | 16 | 16 | 16 |
L | mm | ±2 | 59 | 59 | 33 | 33 | 59 | 59 |
W | mm | ±0.05, -0.00 | 12 | 6 | 6 | 3 | 3 | 3 |
Z | mm | ±1 | 13 | 13 | 13 | 13 | 13 | 13 |
B: For dies used in clicking machines it is preferable that this tolerance be ±0.5mm.
Dimensions of Standard Dumbbell DiesA (U.S. Customary Units)
Dimension | Units | Tolerance | Die A | Die B | Die C | Die D | Die E | Die F |
A | in. | ±0.04 | 1 | 1 | 1 | 0.62 | 0.62 | 0.62 |
B | in. | max | 1.6 | 1.6 | 1.6 | 1.2 | 1.2 | 1.2 |
C | in. | min | 5.5 | 5.5 | 4.5 | 4 | 5 | 5 |
D | in. | ±0.25B | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 | 1.25 |
D-E | in. | ±0.04 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
F | in. | ±0.08 | 1.5 | 1.5 | 0.75 | 0.75 | 1.5 | 1.5 |
G | in. | ±0.04 | 0.56 | 0.56 | 0.56 | 0.56 | 0.56 | 0.56 |
H | in. | ±0.08 | 1 | 1 | 1 | 0.63 | 0.63 | 0.63 |
L | in. | ±0.08 | 2.32 | 2.32 | 1.31 | 1.31 | 2.32 | 2.32 |
W | in. | ±0.002, -0.000 | 0.500 | 0.250 | 0.250 | 0.125 | 0.125 | 0.250 |
Z | in. | ±0.04 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
B: For dies used in clicking machines it is preferable that this tolerance by ±0.02in.