TECLOCK 每 Deep Hole / Long Leg Type Durometer
TECLOCK – Deep Hole / Long Leg Type Durometer
Brand: Teclock
Description:
In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of a deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.
Brand: Teclock
Description:
In some cases, such as the measurement surface of uneven or with a narrow flat area and the bottom of a deep hollow, it may be impossible to achieve the proper results because of the difficult contact of the presser foot. The Deep Hole (H) type and the Long Leg (L) type make such measurements possible with a small or long presser foot. Both are supplied with Peak Pointer and the upper/lower limiters. The Long Leg type meets also to DIN 53505 standard.
| Model | Type | Application / Materials | Conform Standards |
Spring Load Value 0-100 |
Indentor Shape (mm) |
Presser Foot Diameter (mm) |
Indentor Height(mm) |
Weight (g) |
|
| Analog | GS-719H | Type A |
General rubber / Deep hole type (narrow hole) |
JIS K 6253, ISO 7619 ASTM D 2240 |
550-8050mN (56.1-821.1gf) |
Truncated Cone of Ø 0.79 with 35° angle |
Ø12 | 2.50 | 120 |
| GS-719L | Type A |
General rubber / Long leg type (thick hole) |
JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505 |
550-8050mN (56.1-821.1gf) |
Truncated Cone of Ø 0.79 with 35° angle |
Ø18 | 2.50 | 360 | |
| GS-720H | Type D |
Hard rubber / Deep hole type (narrow hole) |
JIS K 6253, ISO 7619 ASTM D 2240 |
0-44450mN (0-4533gf) |
Conical Cone of R0.1 with 30° angle |
Ø12 | 2.50 | 120 | |
| GS-720L | Type D |
Hard rubber / Long leg type (thick hole) |
JIS K 6253, ISO 7619 ASTM D 2240, DIN 53 505 |
0-44450mN (0-4533gf) |
Conical Cone of R0.1 with 30° angle |
Ø18 | 2.50 | 360 | |
| Digital | GSD-719K-H | Type A |
General rubber / Deep hole type (narrow hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
550-8050mN (56.1-821.1gf) |
Truncated Cone of Ø 0.79 with 35° angle |
Ø12 | 2.50 | 120 |
| GSD-719K-L | Type A |
General rubber / Long leg type (thick hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505 |
550-8050mN (56.1-821.1gf) |
Truncated Cone of Ø 0.79 with 35° angle |
Ø18 | 2.50 | 360 | |
| GSD-720K-H | Type D |
Hard rubber / Deep hole type (narrow hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240 |
0-44450mN (0-4533gf) |
Conical Cone of R0.1 with 30° angle |
Ø12 | 2.50 | 120 | |
| GSD-720K-L | Type D |
Hard rubber / Long leg type (thick hole) |
JIS K 6253, JIS K 7215, ISO 7619, ISO 868, ASTM D 2240, DIN 53 505 |
0-44450mN (0-4533gf) |
Conical Cone of R0.1 with 30° angle |
Ø18 | 2.50 | 360 | |
