MITUTOYO - Digital & Manual Rockwell Hardness Tester / Testing Machine
MITUTOYO - Digital & Manual Rockwell Hardness Tester / Testing Machine Hardness Testing Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
MITUTOYO - Digital & Manual Rockwell Hardness Tester / Testing Machine
Brand: Mitutoyo
Model: HR-100/200/300/400 Series

Code No 963-210 963-220 963-231 963-240 963-241
Model No HR-110MR HR-210MR HR-320MS HR-430MR HR-430MS
Type of hardness test Rockwell
- - Rockwell superficial - Rockwell superficial
Standard JIS B 7726 ISO6508-2 (ASTM E18)
Display Analog Digital
Minimum reading 0.5 HR indication 0.1 HR indication
Preliminary test force (handling support) Automatic pre-setting dial gauge Loading navigator indication Automatic steering wheel brake
Preliminary test force setting - - Dial switching - Dial switching
Total test force setting Weight change Dial switching
Test force duration Manual Motor drive
Button start
Motor drive
Automatic start
Test force duration Manual Fixed 3-5.5s or manual 3-60s setting or manual operation
Maximum specimen height 180 mm (100mm if cover is attached)
Maximum specimen depth 165 mm (from indenter axis to the frame)
Function - - - Success or failure decision function
- - - Offset revision function
- - - Hardness conversion function
Data output - - - Digimatic (SPC), RS-232C
Power supply No power required AC100-240v, 1.2A
Dimensions Approximately 296 (W) x 512 (D) x 780 (H) mm Approximately 235 (W) x 512 (D) x 780 (H) mm Approximately 235 (W) x 516 (D) x 780 (H) mm
Mass Approximately 49kg Approximately 47kg Approximately 47kg Approximately 50kg
Standard Accessories
Brinell hardness tests can be performed by using the following optional accessories: a Brinell indenter, a weight set and a measurement microscope.
Order No. Item Description Order No. Item Description
_*1 Diamond indenter For R (for HR-xxxMR) Hardness test block 65HR30N (only HR-Xms attachment)
_*1 Diamond indenter For R/S (for HR-xxxMR) Hardness test block 70HR30T (only HR-Xms attachment)
Steel ball indenter Φ1/16” (Φ1.5875mm) 357651 AC adapter AC100-240V, 1.2A DC12V, 3.5A
Steel ball (spare) Φ1/16” (Φ1.5875mm) 02ZAA000 AC adapter
Flat anvil Φ 64mm   User’s manual  
V-anvil (large) Φ 40mm, 120° V-groove 30mm wide 56AAK312 Vinyl cover  
Hardness test block 60HRC Accessory box  
Hardness test block 30HRC Level  
Hardness test block 90HRM  
*1: Available for specific model.


Please leave your enquiry here, we will reply as soon as possible.

*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version