KANETEC 每 Magnetic Block KMV
KANETEC – Magnetic Block KMV
Brand: Kanetec
Model: KMV
Application:
Features:
↗ The holding power applies to the V-face and Φ 20 round bar.
↗ For accuracy, please refer to attachment file.
Brand: Kanetec
Model: KMV
Application:
- Holding tools for round bar marking and drilling.
- Holding tools for electric discharge machining.
- Holding tools for three-dimensional measuring instruments and various measuring systems.
Features:
- Workpieces can be held on the top face (V face), and rear face.
- T-handle ON/OFF switch comes attached, but can be removed.
- They are of drip-proof and oilproof construction.
- One set consists of two blocks.
- Super high accuracy finish is also available. Please contact us.
| [mm(in)] | |||||||
| Model | Holding Power | Applicable Diameter | Dimensions | Mass | |||
| B | H | L | a | ||||
| KMV-50D | 150N (15kgf) or over | Φ 50(1.96) | 40(1.57) | 50(1.96) | 70(2.75) | 36(1.41) | 1 kg/ 2.2 Ib |
| KMV-80D | 200N (20kgf) or over | Φ 80(3.14) | 50(1.96) | 80(3.14) | 100(3.93) | 60(2.36) | 3 kg/ 6.6 Ib |
| KMV-125D | 230N (23kgf) or over | Φ 125(4.92) | 100(3.93) | 150(5.90) | 90(3.54) | 5 kg/11 Ib | |
↗ For accuracy, please refer to attachment file.
