HANNA 每 Total Hardness Test Kit HI 38033
HANNA – Total Hardness Test Kit HI 38033
Brand: Hanna
Model: HI 38033
Descriptions:
The HI38033 is a titration-based chemical test kit that determines the total hardness concentration within the 0 to 30 grains per gallon (gpg) range. The HI38033 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents to perform approximately 100 tests.
Complete setup
Significance of Use:
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Specifications: HI38033 Total Hardness (*as CaCO₃)
* 1 gpg = 17 ppm CaCO₃
Brand: Hanna
Model: HI 38033
Descriptions:
The HI38033 is a titration-based chemical test kit that determines the total hardness concentration within the 0 to 30 grains per gallon (gpg) range. The HI38033 is supplied with all of the necessary reagents and equipment to perform the analysis. The test kit contains enough reagents to perform approximately 100 tests.
Complete setup
- All required materials are included with the test kit, such as the sample beaker, plastic pipette, and reagent dropper bottles.
- Readings from 0 to 30 gpg are determined to 1 gpg resolution.
- There is no need to buy a new kit when reagents are exhausted. The HI38033-100 can be ordered to replace the reagents supplied with the kit.
Significance of Use:
Water hardness has traditionally been defined as the capacity of water to precipitate soap. The ionic species in the water causing the precipitation was later found to be primarily calcium and magnesium. Thus, water hardness is actually a quantitative measure of these ions in the water. It is also now known that certain other ion species, such as iron, zinc, and manganese contribute to the overall water hardness. The measure and subsequent control of water hardness is essential to prevent scaling and clogging in water pipes.
Specifications: HI38033 Total Hardness (*as CaCO₃)
| Type | Titration |
| Range | 0-30 gpg |
| Smallest Increment | 1 gpg |
| Method | EDTA |
| Number of Tests | 100 avg. |
| Ordering Information | HI38033 test kit comes with 30 mL buffer solution, 10 mL calmagite indicator, 75 mL EDTA solution (2), 20 mL plastic beaker with cap and 1 mL plastic pipette. |
| Reagent | HI38033-100 total hardness (*as CaCO₃), 100 tests avg. |
