IMADA - DTX Screw Cap Torque Tester
Download Files
IMADA_-_Screw_Cap_Tester_Accessories.pdf (614.98 KB)
IMADA_-_DTX_Screw_Cap_Torque_Tester.pdf (855.4 KB)
IMADA_-_Screw_Cap_Tester_Accessories.pdf (614.98 KB) IMADA_-_DTX_Screw_Cap_Torque_Tester.pdf (855.4 KB)
IMADA - DTX Screw Cap Torque Tester
Brand: Imada
DTX series force range
Standard table / Standard pins are included
DTXS/DTXA series specification
*1 These are the specifications for International model. Please note that this unit is different from Japanese domestic model and international one.
*2 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*3 The battery is more consumed when connected to USB flash drive or a displacement scale.
*4 Angle (displacement) scale is necessary to valid this function.
*5 Not always available for Mitutoyo digimatic products.
*6 USB flash drive is not included.
Please download the attachment to get more of the information to reference.
Brand: Imada
DTX series force range
Standard table / Standard pins are included
| Model | Range | Display | Resolution | |
| DTXA-2N | DTXS-2N | 2 N-m (200N-cm) | 2.000N-m (200.0N-cm) | 0.001N-m (0.1N-cm) |
| DTXA-5N | DTXS-5N | 5 N-m (500N-cm) | 5.000N-m (500.0N-cm) | 0.001N-m (0.1N-cm) |
| DTXA-10N | DTXS-10N | 10N-m (1000N-cm) | 10.00N-m (1000N-cm) | 0.01N-m (1N-cm) |
DTXS/DTXA series specification
| Model | DTXA | DTXS |
| Outline |
Advanced model equipping various functions such as input/output the angles and saving to USB flash drive. |
Simple standard model maintaining DTXA performance. |
| Accuracy | ±0.5%F.S.±1digit | |
| Unit of measurement | N-m, N-cm, kgf-m, kgf-cm, lbf-in, ozf-in (Unit switching is possible.)(*1) | |
| Display | 4-digit | |
| Display update | 16 times /sec | |
| Sampling rate | Maximum 2000 data/ sec(*2) | |
| Battery | 8 hours (2 hours full charge)(*3) | |
| Safe overload rating | Approx. 200% | |
| Operating Environment | Temperature: 0 – 40 degree Celsius Humidity: 20 -80%RH | |
| Function |
Customized display(header and footer) / Peak hold(Clockwise and Counterclockwise)/ Internal memory(1000 point data)£©/ Comparator (OK or NG judgment)/ Reversible display/ Sign inversion/ Zero clear timer/ +NG alarm/ Off timer(Auto power off)/ Dumping/ Time display/ setting lock |
|
| 1st2nd peak/ Angle detection at torque peak value(*4) / Angle zero reset at selected torque(*4) | - | |
| Output |
USB, RS232C, Mitutoyo digimatic (*5), 2 VDC analog output (D/A), Comparator 3 steps (-NG/OK/+NG), Overload alarm |
|
|
Sub comparator 2 steps (output of large or small judgment), USB flash drive, Angle(displacement) |
- | |
| Overload warning | Approx.110%F.S. (Warning message and alarm ) | |
| External connecting switch | SEND (a point of contact holding), Zero reset, Peak ON/OFF setting | |
| Weight | Approx. 4.5kg | |
| Dimensions | Please refer to dimensions. | |
| Accessory |
AC adapter, Inspection certificate, CD driver (including simple software for data logging), , USB cable, Carrying case, L wrench |
|
| USB flash drive adapter(*6) | - | |
| Approved standard |
JIS S 0022 (2001) Guidelines for all people including elderly and people with disabilities -- Packaging and receptacles -- Test methods for opening “6.3 Screw top receptacle” |
|
*2 Up to 100 data/sec. is saved in USB memory (selectable among 1, 50, and 100 /sec)
*3 The battery is more consumed when connected to USB flash drive or a displacement scale.
*4 Angle (displacement) scale is necessary to valid this function.
*5 Not always available for Mitutoyo digimatic products.
*6 USB flash drive is not included.
Please download the attachment to get more of the information to reference.
