TOKI SANGYO 每 Viscometer (TV-25 & TV-35)
TOKI SANGYO 每 Viscometer (TV-25 & TV-35) Water Analysis Meter  Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
TOKISANGYO – Viscometer (TV-25 & TV-35)
Brand: TOKI SANGYO - Japan
Model: TV-25 & TV-35

 
Features: 
* Small amount sample size, which able to save cost of high value (expensive) of those particular sample.



Model TV-25 Viscometer:
There are 2 types of TV25 features a multirange function, B type (spindle type) and E type (Cone-plate type) that only needs a small amount of 1ml.
 
Model TV-35 Viscometer:
TV35 features a program and multi-range function, meets various fluid, measurement requirements and measures a viscosity efficiently. Setting a rotational speed per 0.1rpm expands measurement range.

 
Common Features of TV-25 / TV-35: 

  • Rotational speed: Users can set a rotational speed from 0.1 rpm to 100.0 rpm per 0.1 rpm.
  • Auto zero-User span: This function lets users calibrate viscometer and correct unit-to-unit variables easily.
  • Measurement conditions memorized function: This function can memorize 5 patterns of measurement conditions in manual, auto-stop Time Visco, program model each.
  • Autostop Function: Measurement is automatically terminated at a prescribed time or when the liquid measured attains a preset viscosity.
  • Remote control function: To start and stop the main unit can be operated by outer signal dry contact. And using the output signal open collector, the situation of viscometer can be confirmed by buzzer and lamp.
  • Upper and lower limit warning: This function informs users with buzzer as a viscosity exceeds an upper or lower viscosity prescribed beforehand.
  • Preheat function: Viscosity measurement can be automatically started at a pre-selected time to allow for a preheat “Waiting” period.
  • Data interchangeability: Data is cross-compatible with that of conventional viscometers conforms JIS and ISO standards.

Specifications:

  TV-25 TV-35
Rotational Speed 0, 0.1 ~ 100.0 rpm
Steps 1,001 Steps per 0.1rpm
Measurement Mode Manual, Auto-Stop Time, Auto-Stop Viscosity Manual, Auto-Stop Time, Auto-Stop Viscosity Program (40 steps at maximum)
Measurement Memory 5 Patterns in each mode
Measurement Range Refer to the following measurement range table
Viscosity Display % / mPa・s / Pa・s / kPa・s (cP/P switching possible)
Accuracy less than ±1.0 % of Full Scale (*4)
Repeatability less than ±0.2 % of Full Scale
Sample Measurement Range 10 – 60⊥
Digital Output RS232C, USB
Input Signal Start Signal (Non-voltage contact)
Output Signal On measuring signal, Buzzer signal, Measuring stop signal (In case of Auto-Stop Mode) *All output signals are open collector
Ambient Temperature Range 0 – 40⊥
Ambient Humidity less than 90% Relative Humidity (Non condensation)
Power AC100‵230V, 50/60Hz (Standard power cable is only available for AC125V) (*5)
Power consumption less than 20 VA
Wetted Material Stainless Steel
Dimension of main unit 105 (W) x 220(D) x 320(H) mm
Dimension of roller stand 290(W)x 300(D)x 430(H)mm
Weight Spindle type(TVB type)Approximate 8.0 kg including roller stand set Cone-Plate type(TVE type) Approximate 9.0kg including roller stand set
 

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version