RANKCONN - Paperboard Edge Compression Crush Tester
RANKCONN - Paperboard Edge Compression  Crush Tester Paper & Film Packaging Testing Melaka, Malaysia, Ayer Keroh Supplier, Suppliers, Supply, Supplies | Carlssoon Technologies (Malaysia) Sdn Bhd
Paperboard Edge Compression Crush Testing Machine
Touch Screen Panel (ECT)
Brand: Rankconn Instruments
Model: CST-200



Product Introduction
:
Paperboard Edge Compression Crush Testing Machine are design to perform multi-function test which could equipped with variety of fixture accessories. It can test the ring compression strength of base paper, the flat compression strength of cardboard, the edge pressure strength, gluing strength and other tests, so that paper production industry mange to control production costs and improve product quality.
 
 
The following tests can be performed: (sold separately)

  1. Equipped with a ring pressure test centre plate and a special sampler for ring pressure, the cardboard ring compressive strength test (RCT) is carried out;
  2. Equipped with edge pressure (bonding) sample sampler and auxiliary guide block to carry out corrugated cardboard edge pressure strength test (ECT);
  3. Equipped with peel strength test rack for corrugated cardboard bonding (peeling) strength test (PAT);
  4. Equipped with a flat pressure sample sampler to carry out the flat compressive strength test (FCT) of corrugated cardboard;
  5. Equipped with groove meter and auxiliary equipment to carry out laboratory groove test (CCT and CMT).
 
 
 
 
Features:

  1. The system automatically calculates the ring compression strength and edge compression strength, without the user's manual calculation, reducing the workload and error;
  2. It comes with the function of packaging stacking test, which can directly set the force and time, and automatically stop the machine after the test is completed;
3. After the test is completed, there is an automatic return function, which automatically judges the crushing force and automatically saves the test data;
4. Three settable speeds, full Chinese LCD display operation interface, a variety of units to choose from;
5. The results of 20 tests can be recorded and saved.
 
 
Technical Parameters:

Model CST-200
Measuring range ≤3 KN
Strength units NkNkgfgflbf
Units of intensity Pa、kPa、MPa、kgf/cm2、lbf/in2
Speed of experimentation 12.5 mm±2.5/min
Accuracy of the indication value ±1 %
Resolution 1 N
Platen size Φ110 mm
Distance between upper and lower platens 60 mm
Electricity Single Phase 220 V / 1.5 A
 
(The above individual parameters may be adjusted) (the picture is for reference, the actual product shall prevail)


Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version