UNITTA - Optional Microphone/Sensor
UNITTA - Optional microphone/sensor
Brand: Unitta
Model: TM-YOKO, TM-Long2, TM-COM, TM-DGS
(can also be used for old products U-508, U-507, U-505, U-305, and U-303)
Horizontal arm microphone
(product number: TM-YOKO)
The horizontal arm microphone has a microphone on the side, so measurements can be taken even in places where there is a narrow gap between the back of the belt and the machine.
(Thickness 10.0mm x Width 20mm/Total length 170mm)
Long arm microphone
(model number: TM-LONG2)
A type with a longer arm (total length 350mm) compared to the standard microphone (total length 170mm).
(Microphone outer diameter φ 12.5mm/total length 350mm)
Corded microphone
(product number: TM-COM)
A 1m long corded microphone that can measure belts located deep inside machines that would be difficult to measure with a standard microphone.
(Microphone outer diameter φ 12.5mm/total length 1m)
Electromagnetic sensor
(product number: TM-DGS)
Since the sensor captures changes in magnetic force rather than sound waves, it is possible to measure steel wires, steel belts, etc. Even in environments where rubber belts are susceptible to noise (background noise) and cannot normally be measured with a microphone, measurements can be made by applying a thin magnetic material (to the extent that it does not affect the natural frequency).
(total length 1m)
Brand: Unitta
Model: TM-YOKO, TM-Long2, TM-COM, TM-DGS
(can also be used for old products U-508, U-507, U-505, U-305, and U-303)
Horizontal arm microphone
(product number: TM-YOKO)
The horizontal arm microphone has a microphone on the side, so measurements can be taken even in places where there is a narrow gap between the back of the belt and the machine.
(Thickness 10.0mm x Width 20mm/Total length 170mm)
Long arm microphone
(model number: TM-LONG2)
A type with a longer arm (total length 350mm) compared to the standard microphone (total length 170mm).
(Microphone outer diameter φ 12.5mm/total length 350mm)
Corded microphone
(product number: TM-COM)
A 1m long corded microphone that can measure belts located deep inside machines that would be difficult to measure with a standard microphone.
(Microphone outer diameter φ 12.5mm/total length 1m)
Electromagnetic sensor
(product number: TM-DGS)
Since the sensor captures changes in magnetic force rather than sound waves, it is possible to measure steel wires, steel belts, etc. Even in environments where rubber belts are susceptible to noise (background noise) and cannot normally be measured with a microphone, measurements can be made by applying a thin magnetic material (to the extent that it does not affect the natural frequency).
(total length 1m)
